Alarm Lock DL 2700 Manual de usuario descargar pdf (Pagina 15)

13

accessories

Strikes for model 11A:

Model 210K

• Strike for single or double inswinging door(s)

(not included with 11A)

Model K24A

• Strike for single outswinging door (included

with 11A)

Model K28

• Strike for double outswinging doors (not

included with 11A)

Narrow stile mounting bars

Model 99 (pair) not shown

• 3/8” x 1” anodized aluminum bar – US28

ﬁ nished. For mounting Model 11A to narrow

stile (glass) doors. Specify 36” or 48”. (Not

Shown)

Rim cylinder

Model CER

• Required for interior arming/disarming of

models 11A, 80, 250, 260, 700, 710 & 715.

Includes two keys (KA or KD)

Mortise cylinder

Model CEM

• Used with the Pilfergard models PG10 and

PG21/E to arm and disarm the alarm circuit.

Includes two keys (KA or KD)

Cylinder ﬁ nger pull

Model 711

• An inexpensive door pull for use when

outside key only access is required.

Outside access door pull

Model 707

• For access from building exteriors. Installed

on the outside of the door and linked to the

lock. After deadbolt is retracted by outside

key, a slight pull will release the deadlatch

and open the door. 8” x 1 1/2”. (For use with

all models except Model 11A).

Battery eliminator

Model PP100

• For use with all PG10, PG21/E, PG30,

250,700, 80, 260, 710 and 715 models.

The PP100 conserves the battery which

automatically takes over as the power source

to sound the alarm in the event of a power

failure or intentional cut-off. A built-in circuit

breaker with push-button reset eliminates

troublesome fuse replacements. Includes a

cam lock cylinder and 6’ of armored cable

adequate to provide a door loop at the

hinged-side of the door. Can be used with all

6V and 9V models.

Double door holder

Model 44

• The Double Door Holder secures the

inactive door to the frame while the active

door is closed. Releasing the active door

automatically allows both doors to swing

freely. Reversible, right or left hand doors.

Cast aluminum 8 1/2” long, 3” wide and 2

1/2” high.

Armored door loop

Model 271

• For use with electriﬁ ed locks. An easy means

for bringing electric current from the hinge

side of a door frame to the door. 18” ﬂ exible

armored cable. End brackets are deep

drawn anodized aluminum to conceal wire

connections.

Single door strike

Models 730 & 725

• Model 730 supplied with models 250, 700 and 80.

• Model 730M supplied with models 260 and

710 and 80. • Model 735 supplied with model

715.

Double door strike

Models 732 & 735

• Model 732 for use with models 250, 700 and 80.

• Model 732M for use with models 260 and 710.

• Model 735 for use with model 715. (Not Shown)

Remote release mags, powermags & RTEs

Essential add-ons and extras

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios