Alarm Lock PDL1300 Manual de instrucciones descargar pdf (Pagina 35)

ACCESS = Entry into a restricted area.

AUDIT TRAIL = A date/time stamped log of previous lock events.

CLOCK

• REAL TIME CLOCK = An accurate built-in clock that allows

date/time stamping of events. The clock can be slowed or

speeded up to fine tune long term accuracy to within three

minutes per year.

• CLOCK SETTINGS = Printout includes date, time, weekday,

and clock speed.

• CLOCK SPEED = The clock can be adjusted to allow faster/

slower speeds and therefore increasing clock accuracy.

CODE = Numeric sequence of numbers (such as: 1234) entered at

the keypad. If Star-Enter-Key is required, must be followed by a

[:] key.

• BASIC USER CODE = User Codes assigned to User Num-

bers 12+ (except Users 297-300). (Does not allow

programming)

• INSTALLER CODE = User Codes assigned to User Numbers

2 and 3. (Allows all programming except Master functions).

• INVALID CODE = A User Code that has not been

programmed in the lock.

• MANAGER CODE = User Codes assigned to User Numbers 4

through 6. (Allows most of the programming functions).

• MASTER CODE = User Code assigned to User Number 1.

Default (factory) Master Code is 123456. The User with the

Master Code has complete control of the lock.

• PRINT ONLY USER CODE = User Code assigned to Users

10 and 11. (Allows no programming except print functions).

• QUICK ENABLE USER 300 CODE = Refers to the User Code

entered by User 297 which (when entered at the keypad)

enables the User Code assigned to User 300 for one time

only.

• QUICK PC ACCESS CODE = Permits upload/download to

DL-Windows Software on a PC running Microsoft Windows.

Refers to the User Code for User 298.

• SERVICE CODE = User 300 User Code. Allows only one

entry, then needs to be re-enabled by the User 297 User

Code to regain access.

• SUPERVISOR CODE = User Codes assigned to Users 7, 8

and 9. Can only program day-to-day operation.

• USER CODE = Code used by Users. Code is 3 to 6 numeric

digits long, allowing controlled entry.

• VALID CODE = An entered User Code that has been

programmed in the device.

COM PORT = A computer serial communications port used to

communicate with the Lock and/or Data Transfer Module.

DATA TRANSFER MODULE (AL-DTM) = A device that permits

transfer of program/data between a computer and the lock.

DATE = Month, Day and Year entered as MMDDYY.

DAY OF WEEK = Sunday through Saturday (where 1 = Sunday and

7 = Saturday).

DEFAULT = Default settings are the original settings that were set

at the factory; in other words, it is the lock's original factory con-

dition when the lock was first taken out of its box. The default

settings are permanently encoded within the lock's fixed mem-

ory, and when the lock is first started, or when power is removed

and re-applied (see Wiring and Power-Up, page 11), the original

factory default settings are re-loaded and take effect.

DISABLE = Turn off.

DOOR NUMBER = Identification of each door with a specific

number. (Used with AL-DTM Transfer Module)

DOWNLOAD = Send data to lock or AL-DTM.

ENABLE = Turn on.

EVENTS = Recorded lock activity.

FUNCTION (also called Programming Functions) = are the

numbers used to program lock features (enabling/disabling

Users, User Groups, Passage Mode, Schedules, etc.).

GROUP

• USER GROUP = Defining a User to specific Groups, allows

User entry when the Group is allowed entry.

• GROUP 1 ENABLES GROUP 4 USERS = A Group 1 USER

CODE entry during a predefined schedule will allow access

to Group 4 Users.

• GROUP 1 PUTS UNIT IN PASSAGE = A Group 1 USER

CODE entry during a pre-defined schedule will unlock unit.

INSTALLER = See.... CODE, INSTALLER CODE.

KEYPAD = 10-numeric keys, : and special ; key.

• KEYPAD LOCKOUT = Keypad is programmed to lockout Us-

ers, for a specified period of time, when a specified number

of invalid User Codes are entered.

• KEYPAD PROGRAMMING = Ability to program the lock

through the keypad.

KEYPRESS = Pressing a button on the Lock’s Keypad.

LEVEL ABILITY = Predefined User Types (such as Master,

Installer, Manager, Supervisor, and Print Only User) have

specific abilities to program and/or control the lock.

LOCKOUT ATTEMPTS = A specified number of invalid User Code

entries (1-9), that will disable the keypad for a predefined period

of time. See… LOCKOUT TIME.

LOCKOUT TIME = A predefined time (1-60) seconds that the lock

will stop accepting User Codes, after a specified number of

invalid User Code entries. See… LOCKOUT ATTEMPTS.

LOG = See... AUDIT TRAIL.

MANAGER = See... CODE, MANAGER CODE.

MASTER = See... CODE, MASTER CODE.

PASSAGE = Allow anyone to pass through the door without USER

CODES (door is unlocked).

PRINTER (AL-IR1) = A printout device such as an infrared printer or

computer printer.

PROGRAM MODE = A mode allowing program/data to be entered

through the keypad. Only specific Users can program a lock

manually, by entering their USER CODE, followed by the [;]

key. To exit program mode, hold any key until repeated beeps

are heard.

SCHEDULE = A programmed operation (enable/disable, lock/

unlock, etc.) on a specific day (Sunday through Saturday) and

time.

SCHEDULES, QUICK = Any one of four most common types of

schedules can be programmed.

TIME = Hours and Minutes in the HHMM format.

TIME/DATE STAMP = A recorded date and time that an event

occurred.

TIMEOUT = Immediate operation for a specified number of hours.

UPLOAD = Receive data from the lock or AL-DTM.

USER = A person who has been provided with a USER CODE for

access through the door.

USER LOCKOUT, TOTAL = All Users (except for Master Code)

have been locked out.

Glossary

1 2 ... 30 31 32 33 34 35 36

Comentarios a estos manuales

Sin comentarios

Alarm Lock PDL1300 Manual de instrucciones Pagina 35

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Alarm Lock PDL1300