Alarm Lock Trilogy DL4100 Series Addendum Especificaciones descargar pdf (Pagina 8)

Plug and play easy online video installation

ISee Video G-Box Plug-and-Play

Gateway Interface, included in

the VIP-GATEWAYX/24 kit, is an

amazingly intelligent internet

video component that allows

the plug & play installation of

the VIP-Gateway camera internet

interface. Other devices that allow

direct connection to the internet

require complex re-conﬁguration of the router, which involves

the use of the customer’s computer and leads to liability issues.

The G-Box segments the network, automatically detects and

properly forwards the video data intended for the VIP-Gateway

or to the customer’s computer/router, as required. The G-Box

is designed to be placed between the broadband modem

and router, and also functions as a router for cases where the

customer’s PC is the only device connected to the broadband

modem. The G-Box (Patents Pending) provides 4 auto-sensing

LAN ports for connection to the VIP-Gateway and to the

customer’s PC, router or other equipment. This revolutionary

new system totally eliminates the need for TCP/IP and network

trained professionals for typical VIP-Gateway installations,

allowing standard alarm personnel to quickly and easily install

these IP devices. The G-Box functions as both a DHCP client and

server, to ﬁt seamlessly into all typical DHCP environments.

SPECIFICATIONS:

Dynamic IP support (without the need of 3rd party service) via iSeeVi-

deo DDNS at no extra cost.

NAPCO iSeeVideo proprietary ﬁrewall penetrating technology

allows user to connect and view video behind even the tightest cor-

porate ﬁrewall.

Works with dynamic IP and IP-sharing allowing multiple Gateways to

be connected to a router (no extra charge)

Transmission protocol: UDP. UDP Port used: Port 80 or any above

1000.

Compatible with virtually all ISP connection types, including cable

modem, DSL, PPPOe DSL, DSL/Router combos and satellite.

G-BOX PHYSICAL SPECIFICATIONS

Dimensions: (H x W x D) 5-5/8 x 3-3/8 x 1-1/8, Inches

Input Voltage: 9VAC via 120 VAC to 9V AC transformer (supplied)

Current: 180mA max (all 4 LAN ports in use)

Aew advanced pixel-based

motion detection!

Pixel-based motion detection

with adjustable sensitivity can

be enabled, so that motion is

detected when the system analyzes

video of a speciﬁc area of interest

and pixel changes are detected.

During installation, using iSee

Video’s setup matrix, the camera’s

ﬁeld-of-view is visually divided up into 48 squares, overlayed on-

screen within a 48-zone matrix.

The installer simply clicks on each square to be deactivated or

excluded from video-motion detection, in effect masking them

out. The installer can choose, for example, to include a path or

stoop to the account’s front door, in the video alarm reporting

coverage, but exclude potential false/nuisance activity of

blowing shrubbery, frontage street activity, etc., with a selectable

sensitivity of low, medium or high. Motion detection can also be

selectively activated using schedules; during armed-only alarm

status; during disarmed-only status, etc.

iSee Video server features:

iSee Video’s server (www.videoalert.net) is the Napco-supplied

server that stores your iSee Video accounts and allows subscribers

to view cameras connected to their VIP-Gateway from any

personal computer or web enabled cell phone or PDA. It is

compatible with computers running the Microsoft Windows®,

Apple® and Linux® operating

systems and is also compatible

with any WAP-enabled cell phone

or mobile video device. The

server also automatically notiﬁes

the subscriber by email upon

receipt of triggered video events

and archives them for viewing

at a later time from any personal

computer. Each standard

subscriber account provides

50MB of storage, allowing the

archiving of approximately (150) 20 second video clips (10

second pre-alarm and 10 second post-alarm, adjustable). The

server is designed to allow the customer to have complete control

of their account in regard to passwords, email addresses and

other personal information, freeing up the installation company

from these routine maintenance procedures. With a simple

one-time logo/artwork upload, the consumers’ login and video

inbox screens may be privately labeled for the security company

providing their service, including contact phone nos., etc. to help

generate referral business.

Scalable account video storage or onsite server solution

2 years of consumer video account access on the Napco

server is included with standard iSee Video hardware kit

(VIP Gateway X/24. This includes, 50MB of video storage,

allowing the archiving of approximately (150) 20 second

video clips (10 second pre-alarm and 10 second post-alarm,

adjustable). However, video storage is totally scalable for

larger video archiving requirements. In fact, larger dealers and/

or central stations may opt to have their own video server,

of unlimited capacity, which Napco will specify and its iSee

Video Applications Group can even set up and provide routine

upgrades/maintenance, as needed.

Central station automation system integration

iSee Video™ system also supports

central station video veriﬁcation,

in addition to enabling dealers’

accounts to look-in on their

premises, the iSee Video system

is integrated with a growing

number of CS automation

systems including MAS, to

capture and deliver live-video

on alarm triggered events to the

CS operators’ screens. In this

way, iSee Video is also a remote

video veriﬁcation monitoring

solution: Alarms in progress can be viewed so false alarms and

unwarranted dispatches can be virtually eliminated.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Comentarios a estos manuales

Sin comentarios

Alarm Lock Trilogy DL4100 Series Addendum Especificaciones Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Alarm Lock Trilogy DL4100 Series Addendum