Alarm Lock PDL5300 Manual de usuario descargar pdf (Pagina 2)

STRIKE INSTALLATION

1. Align strike with latch.

2. Trace strike outline on door jamb.

3. Mortise jamb and install dust box and strike.

LOCK PREPARATION

From the factory, the primary and secondary sides of the

lock are attached together. Separate the secondary from

the primary side as follows:

1. Insert the metal key into the secondary side lock cylin-

der. Turn the key 45° (either direction).

2. See Fig. 5 and 6. Insert the lever release pin through

the oval hole located in the secondary side housing

and through the small round hole in the lever. While

depressing the lever catch, pull off lever. See Fig. 6 for

an image of the lever catch.

3. Depressing this lever catch also allows the secondary

side to be separated from the primary side. Use a

small screwdriver to depress the lever catch and pull

the secondary lock housing away from the primary side

housing. See Fig. 6.

For Hollow Metal Doors:

Requires horizontal and vertical lock and latch case

support (provided by door manufacturer).

IMPORTANT: Be sure to remove all metal burrs from

connector cable hole--sharp edges will eventually wear

away wire insulation.

4. Drill all remaining holes in template as required.

INSTALLATION JIG

1. If 2 1/8" hole already exists, use optional Alarm Lock

Installation Jig to ensure accurate locating and drilling

of 3/8" and 5/16" thru-bolt holes.

2. For best results, align the Installation Jig to door with a

square and clamp to door before drilling See Fig. 2.

LATCH INSTALLATION

1. Drill 1" diameter hole for latch.

2. Mortise for latch front. Insert latch and fasten with two

screws supplied.

Note: It is important that both 1" and 2 1/8" holes be

on the same horizontal center line.

FIG. 3: LATCH INSTALLATION

FIG. 4: STRIKE INSTALLATION

FIG. 2: ALARM LOCK INSTALLATION JIG

CONNECTOR

CABLE HOLE

1" (25.4mm)

diameter

SECONDARY MOUNTING PLATE HOLES

5/16" (8mm) diameter

FIG. 5: INSERT LEVER RELEASE PIN

FIG. 6: LEVER CATCH

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Alarm Lock PDL5300 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Alarm Lock PDL5300