Alarm Lock DL5200 Manual de instrucciones descargar pdf (Pagina 7)

Change Existing Master Code* ; 1 ;

[ __ __ __ __ __ ] ; 1 ; [ __ __ __ __ __ __ ] ; [ __ __ __ __ __ __ ]

Old (or "Factory") Master Code New Master Code* Confirm New Master Code*

For new locks, follow the "Quick Start" on page 2.

Programming Functions

* Once the number of digits is selected, it cannot be changed unless all programming is erased and the Factory Default settings are re-loaded

(power must be removed and re-applied as per the "Erase All Programming" procedure found on page 11.

** Required only if DL5200 is locked.

Add/Change User Codes ; [ __ __ ] ;

Follow the "Quick Start" on page 3.

[ __ __ __ __ __ __ ] ; [ __ __ ] ; [ __ __ __ __ __ __ ]

Master Code or New User Code

Manager Code**

Bank (Column)

0-9

User (Row)

1-9

Add/Change Manager Codes ; [ __ ] 0 ;

Follow the "Quick Start" on page 3. Note: You can also add/change the Manager Code in location

00 by entering the Master Code,

; 2 ; then the new Manager Code.

[ __ __ __ __ __ __ ] ; [ __ ] 0 ; [ __ __ __ __ __ __ ]

Master Code** New Manager Code

User (Row) Always zero for Managers Manager Bank (Column) 0-9

Deleting Manager & User Codes ; [ _ _ ] ; :

Follow the "Quick Start" on page 3.

[ __ __ __ __ __ __ ] ; [ _ _ ] ; :

Master or Manager Code**

User (Row) --Always zero for Managers--

0-9

Manager Bank (Column)

0-9

Disable/Enable Users

Enter the Master Code to disable/enable any Manager or User, or enter a Manager Code to disable any User

within the Manager's Bank.

Disable User Number

[ __ __ __ __ __ __ ] ; [ __ __ ] ; (Allow system to relock)

Master or Manager Code Bank/User Number

Enable User Number

[ __ __ __ __ __ __ ] ; [ __ __ ] ; (Allow system to relock)

Master or Manager Code Bank/User Number

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Alarm Lock DL5200 Manual de instrucciones Pagina 7