Alarm Lock PL6100 Manual de instrucciones descargar pdf (Pagina 12)

"Programmable Features" Screen - Remote tab

The "Remote Input" wires are two white wires located

inside the rear housing. When these two white Remote

Input wires are momentarily shorted, the PL6100

unlocks. These Remote Input wires are enabled at the

factory and are ready for use.

Program Remote Input Functions as follows:

Remote Release (Momentary)

Check to enable the Remote Input feature in the se-

lected PL6100 lock. Will cause the PL6100 to unlock

when the two white Remote Input wires are momentarily

shorted.

Remote Toggles Passage Mode

Remote Input activation toggles Passage Mode

(Passage Mode allows passage through the door

without the need for a valid proximity card to be pre-

sented).

Remote Input Disables Unit

Regardless of the current state of the lock, that state will

remain unchanged (and lock will be disabled) for the du-

ration of Remote Input switch closure.

Important: If this feature is enabled, power to the lock

MUST be provided from an external power supply.

Forced Lock Follows Remote Input

When Remote Input switch is closed, regardless of the

current state of the lock, the lock will lock for the dura-

tion of the Remote Input switch closure.

Important: If this feature is enabled, power to the lock

MUST be provided from an external power supply.

Forced Unlock Follows Remote Input

When Remote Input switch is closed, regardless of the

current state of the lock, the lock will unlock for the dura-

tion of the Remote Input switch closure.

Important: If this feature is enabled, power to the lock

MUST be provided from an external power supply.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Alarm Lock PL6100 Manual de instrucciones Pagina 12