Alarm Lock Trilogy DK3000 Series Manual de usuario descargar pdf (Pagina 19)

NETPANEL dedicated

access panel Includes

• Circuit board with onboard ﬂash

memory;12V power supply, with

transformer and rechargeable backup

battery

• Inputs supporting two of any combination

of NETDK or NETPDK keypads, PLUS up

to two Wiegand devices

• Special “Two Door Mode” allows two

keypads and/or two Wiegand devices to

separately control two doors

• Two Form-C relays

• Inputs for door position contact to

indicate the status of the door, open or

closed;

• Inputs for a remote release button or

sensor

• Onboard bi-directional Networx radio

• Wiegand interface, red LED, green LED,

and sounder.

Wiegand Device Support

• The NetPanel’s Wiegand inputs

currently support all Wiegand output

devices, that support the Data 0/Data

1 communications protocol and are

compatible with HID Prox credentials

(including Wiegand keypads and

combination units.)

Examples of Wiegand Devices

Supported:

• HID Classic Swipe Wiegand Reader Model

310 (36-bit card format compatible).

• HID ProxPro with Keypad Model 5355

• HES model RF5910 Hybrid Electric Strike

with HID125k reader

*** Other formats may be accommodated for special orders.

Ask you Alarm Lock Representative.

Ordering Info.

NETPDKPAK26D Complete 2-Door NetPanel

System with 1 PDK wireless keypad with built

in HID Prox Reader, 26D ﬁnish.

****

Includes 12

volt power supply, onboard bidirectional radio,

4Ah/12V rechargeable backup battery and

plug in AC transformer. (System requires use

of one of the AL-IM Series Gateway Modules,

separately purchased.)

NETDKPAK26D Complete 2-Door NetPanel

System with 1 DK wireless keypad, 26D ﬁnish.

****

Includes 12 volt power supply, onboard

bidirectional radio, 4Ah/12V rechargeable

backup battery and plug in AC transformer.

(System requires use of one of the AL-IM Series

Gateway Modules, separately purchased.)

NETPDK26D PDK Wireless Keypad with built

in HID Prox Reader only, 26D ﬁnish.

****

NETDK26D DK Wireless keypad only, 26D

ﬁnish.

(****Note: Special keypad ﬁnishes may also be available – ask

your Alarm Lock Rep.)

NETPANEL Access Control Panel to be used

with other approved Wiegand output readers.

Includes 12 volt power supply, onboard bidirec-

tional radio, 4Ah/12V rechargeable backup

battery and plug in AC transformer.

DL-WINDOWS Free Alarm Lock Trilogy Mi-

crosoft Windows-based software application,

v.4.177 or higher, supports Trilogy Networx

Wireless Keypads, Locks and Trilogy stand-

alone locks, with single database. No-charge,

downloadable online at

www.alarmlock.com

AL-IM80211 Hardwire/Wireless Gateway

Interface Module, with integral bi-directional

radio, interfaces Networx keypads/locks with

PC network with hardwired Ethernet and

wireless 802.11. Powered with Class 2, 6VAC

transformer (supplied). Supports up to 63

Networx NetPanels. Two antennas. Ceiling or

wall mountable.

AL-IME Hardwire Gateway Interface Module,

supports up to 63 Networx NetPanels, similar

to above, but using hardwired connection to

the network via RJ45 Ethernet cable. One an-

tenna. Powered with Class 2, 6VAC transformer

(supplied). Ceiling or wall mountable.

AL-IMEPOEP Hardwire Gateway Interface

Module + POE, supports up to 63 Networx Net-

Panels, as above, but using hardwired Ethernet

and Power Over Ethernet (P.O.E.). Connects

directly to a network via Ethernet cable. One

antenna. Ceiling or wall mountable.

** Note: Battery life is directly proportionate to activations:

users, door usage, program updates and audit trail downloads.

Expected 5 year+ battery consumption estimate assumes 2000

authorized users, 100 passes per day, 365 days per year; daily

updates changing one user and downloading 200 logged

events every day.

*** Note: Actual coverage is dependent upon building con-

struction and mounting location of Gateway. Multiple AL-IM

Series Gateways may be used for large coverage areas.

Router

Existing

Corporate

Ethernet

Network

NETPDK

GATEWAY

Wire up to

2 Wiegand

Devices

NETDK and/or NETPDK keypads (and/or Wiegand devices) wired to a dedicated NETWORXPANEL control panel

NETDK

EGND AC IN WOA WO W1

PWR

GND

RED

LED

WIEGAND INPUT

GRN

LED

SNDR

DRIVE

(+) (–)

(YEL)

(GRN)

N/O N/C COM

AUX RELAY KYPD PWR

LOCK

PWR

(+)

COM

N/C N/O

MAIN RELAY

LOCK

PWR

(–)

DOOR

POSITION

CONTACT

REMOTE

RELEASE

INPUT

T1 T2 T3 T4 T5 T6 T7 T8 T9 T10

T11 T12

T13

T14 T15

T16

T17 T18

T19 T20 T21 T22

T23

T24 T25 T26 T27

N/O

Momentary

Switch

SECONDARY

NETPDK

MAG LOCK

(OR

FAIL-SAFE

ELECTRIC

DOOR

STRIKE)

N/C

Emergency Exit

Switch (or Fire

Panel Relay)

Jumper

Wire

The system is capable of controlling two doors using up to two of any combination of NETDK or NETPDK keypads, PLUS up to two Wie-

gand devices. Two auxiliary Form-C relays are available for up to two of any combination of magnetic locks and/or electric door strikes.

Door

Position

Contact

ELECTRIC DOOR

STRIKE

(FAIL-SECURE)

NOT FOR FIRE EXITS

PRIMARY

NETDK

Red (+ DC)

White (Data 1)

Green (Data 0)

Black (- Ground)

Green (Data 0)

Brown (Red LED)

Orange (Green LED)

Yellow (Beeper)

PRIMARY

WIEGAND**

SECONDARY

WIEGAND**

Red

Black

Yellow

Green

*TSD = Transient Suppression Device (two supplied): Mount the TSD as close to the device to be protected as possible.

**Example device shown: HID ProxPoint

Plus Model 6005B.

TSD*

Wired (RJ-45)

or Wireless 802.11

Wired (RJ-45)

or Wireless 802.11

NETWORX NETPANEL

MAGNETIC LOCK AND/OR ELECTRIC DOOR STRIKE ONE OR TWO

DOORS/ TWO KEYPADS AND/OR TWO WIEGAND DEVICES

SIMPLE NETWORX WIRELESS KEYPAD SYSTEM

Router

Existing

Corporate

Ethernet

Network

NETPDK

GATEWAY

Wire up to

2 Wiegand

Devices

NETDK and/or NETPDK keypads (and/or Wiegand devices) wired to a dedicated NETWORXPANEL control panel

NETDK

EGND AC IN WOA WO W1

PWR

GND

RED

LED

WIEGAND INPUT

GRN

LED

SNDR

DRIVE

(+) (–)

(YEL)

(GRN)

N/O N/C COM

AUX RELAY KYPD PWR

LOCK

PWR

(+)

COM

N/C N/O

MAIN RELAY

LOCK

PWR

(–)

DOOR

POSITION

CONTACT

REMOTE

RELEASE

INPUT

T1 T2 T3 T4 T5 T6 T7 T8 T9 T10

T11 T12

T13

T14 T15

T16

T17 T18

T19 T20 T21 T22

T23

T24 T25 T26 T27

N/O

Momentary

Switch

SECONDARY

NETPDK

MAG LOCK

(OR

FAIL-SAFE

ELECTRIC

DOOR

STRIKE)

N/C

Emergency Exit

Switch (or Fire

Panel Relay)

Jumper

Wire

The system is capable of controlling two doors using up to two of any combination of NETDK or NETPDK keypads, PLUS up to two Wie-

gand devices. Two auxiliary Form-C relays are available for up to two of any combination of magnetic locks and/or electric door strikes.

Door

Position

Contact

ELECTRIC DOOR

STRIKE

(FAIL-SECURE)

NOT FOR FIRE EXITS

PRIMARY

NETDK

Red (+ DC)

White (Data 1)

Green (Data 0)

Black (- Ground)

Green (Data 0)

Brown (Red LED)

Orange (Green LED)

Yellow (Beeper)

PRIMARY

WIEGAND**

SECONDARY

WIEGAND**

Red

Black

Yellow

Green

*TSD = Transient Suppression Device (two supplied): Mount the TSD as close to the device to be protected as possible.

**Example device shown: HID ProxPoint

Plus Model 6005B.

TSD*

Wired (RJ-45)

or Wireless 802.11

Wired (RJ-45)

or Wireless 802.11

NETWORX NETPANEL

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comentarios a estos manuales

Sin comentarios

Alarm Lock Trilogy DK3000 Series Manual de usuario Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Alarm Lock Trilogy DK3000 Series