Alarm Lock NETWORXPANEL Manual de instrucciones

1 Trilogy NETWORXPANEL Programming Instructions WI1855B 3/12 345 Bayview Avenue Amityville, New York 11701 For Sales and Repairs 1-800-ALA-LOCK For

10 Quick Start The NETDK and NETPDK with proximity card reader are secured single-door or double-door digital keypads for use within the wireless Netw

11 Quick Start (cont’d) Set the Time 1. Enter Program Mode (if not in already. If you just finished the above procedure, you are still in Program M

12 Verifying Basic Keypad User Codes Test a User Code. Press the User Code at the keypad. VALID CODE: The Green LED will flash momentarily and the s

13 Function 1 Change Master Code See page 14 Function 2 Add/Delete/Change User Codes See page 14 Function 3 User Disable (By User Number) See page

14 Programming Level Defaults for the NETWORXPANEL Users added will default to a Group Association and a Programming Level ability as follows: USER TY

15 USERS (Continued) ; 6 : 6. Enable Total User Lockout Mode (This Function enabled through keypad only) 7. Disable Total User Lockout Mode

16 ; 1 2 ; 0 0 0 : 12. Clear All Schedules and Timeout Functions Function 12 clears all programmed Schedules and all Timeout Functions. (To cle

17 GROUPS Group Enable/Disable with Timeout (Enter Timeout, XXX Hours) (Functions 25-34 are enabled through the keypad only) • Hours must be between 0

18 ; 3 8 ; [ _ _ _ _ _ _ ] : (Date) 38. Set Date • Use Month Day Year format - MMDDYY - Single digit months and days are entered with a preced

19 ; 4 5 : 45. Enable Passage Mode (This Function enabled through keypad only) ; 4 6 : 46. Disable Passage Mode (This Function enabled throug

2 Table of Contents Features ... 3 Supported Products ...

20 55 - 59. Reserved 49. Disable Permanent Passage Mode (This Function enabled through keypad only) • Function 48 allows passage through the d

21 ; 6 0 ; [ _ ] : (Number of Attempts) 60. Number of Attempts Before Keypad Lockout 61. Set the Attempts Keypad Lockout Time • Number of attem

22 ; 6 7 ; [ _ _ ] : (Event Number) 67. Add System Features * Features 26, 27 & 28 will delay User

23 Scheduled Passage and Group Use the functions below to enable Passage Mode and enable/disable Groups at the time programmed. • For day enter: 1 for

24 QUICK SCHEDULES 84. Business Quick Schedule 7AM-5PM, Monday - Friday (This Function enabled through keypad only) ; 8 4 ; [ _ ] : (Group) 85.

25 90. Relay Activation (Open Time Window) ; 9 0 ; [ _ ] ; [ _ _ _ _ ] : (Day)

26 ; 9 9 ; 0 0 0 : 99. Clear All Lock Programming (This Function enabled through keypad only) Clears all programming, and returns the NETWORXPAN

27 Groups and Scheduled Group 1 Examples The following examples detail the more advanced features of the system. Although all features and device fu

28 Groups and Scheduled Group 1 Examples (cont'd.) Functions 90/91: Use Function 90 and 91 (see page 25) to create a window of time where if any

29 Function Num-ber(s) Function Name Programming 43/44 Clock Adjust 52/53/54 Pass Time (3 sec)  10 sec  15 sec  60 Set Keypa

3 Audit Trail • 40,000 Event Capacity • Entries Logged with Time and Date • Critical Programming Events Logged • Uploadable using Alarm Lock's DL

30 User Number (1-5000) User Code (3-6 digits) User Name 1 2 3 4

31 User Number (1-5000) User Code (3-6 digits) User Name 1 2 3 4

32 Function Number Day(s) Time Up to 500 scheduled functions can be programmed. For Day Enter : 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday 5

33 Function Number Day(s) Time Up to 500 scheduled functions can be programmed. For Day Enter : 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday 5

34 ACCESS = Entry into a restricted area. AMBUSH = A special Code entered at the keypad when the User is forced to unlock a security device. The devi

35 Trilogy® is a registered trademark of Alarm Lock. ProxCard® and ProxKey® are trademarks of the HID© Corporation.. Microsoft® and Windows® are tra

36 ALARM LOCK LIMITED WARRANTY ALARM LOCK SYSTEMS, INC. (ALARM LOCK) warrants its products to be free from manufacturing defects in ma-terials and

4 AL-IM80211 AL-IME AL-IMEPOE Supported Products Proximity Card Reader/Enroller (AL-PRE) An AL-PRE is used to quickly enroll multiple proximity

5 General Overview Why use User Codes? With ordinary door locks, the need to make physical copies of metal keys and distributing them can be a huge or

6 Terminology Used in this Manual Wired to the dedicated NETWORXPANEL control panel, the NETPDK and NETDK are secured digital keypads for use within t

7 this list will determine its Programming Level, and therefore the User's programming abilities. Because the location within this list is the d

8 Programming Level Defaults for the NETWORXPANEL Users added will default to a Group Association and a Programming Level ability as follows: USER TYP

9 ACTIVITY LED FLASHES SOUNDER BEEP(S) COMMENTS Keypress 1 RED 1 Normal Operation Access Granted or Remote Release 2 GREEN 2 Remote release enabl