Alarm Lock Trilogy DL2800 Manual de instrucciones descargar pdf (Pagina 8)

Schedules and TimeZones

You can use the keypad to add simple "Schedules" to your

lock. Schedules are events (recorded lock activities) that are

assigned to occur automatically at specific times. For example,

you can program the lock to allow Group 1 Users access ONLY

on Wednesdays.

DL-Windows multiplies your flexibility, allowing the creation of

many different combinations of Scheduled events to suit the

needs of your various installations. For example, you can pro-

gram the lock to allow Group 1 Users access ONLY during spe-

cific business hours (unlock at 9AM, lock at noon for lunch,

unlock at 1PM, and lock again at 5PM--every weekday).

In addition, DL-Windows makes Schedule creation much eas-

ier. Use the Schedule - TimeZone screen to first create an

individual block of time called a "TimeZone" (for example, "9AM

to noon weekdays"). A TimeZone is then linked to an event to

make a Schedule (for example, "unlock between 9AM and

noon weekdays"). To make Scheduling easier, DL-Windows

allows TimeZones to be created, named and saved for the fu-

ture, to be easily assigned to different events and added to

multiple locks as needed.

Users 299 & 300

User Codes added to locations 299 and 300 have special abili-

ties, as follows:

User 299: AL-DTM Code

This is the only User Code that will initiate data transfer with

the AL-DTM--and without allowing the lock to unlock (the

User Code for User Number 299 does NOT allow access).

An AL-PCI cable and an AL-DTM (pre-programmed by a

computer with DL-Windows) are required.

User 300: One-Time Only Service Code

This is a one-time-only service User Code designed to be

used for access by temporary workers. When enabled, en-

tering User Code 300 into the keypad will allow the DL2800

lock to unlock only once (re-entering User Code 300 will not

operate). User Number 300 is enabled by Function 9.

(Note: Function 9 can only be enabled by Users with a Pro-

gram Authority Level of 2).

User Code 300 can also be used for guard tour duties.

DL-Windows

DL-Windows is a computer program that allows you to program

your ALARM LOCK Security Lock. You do not need DL-

Windows to program your lock, but it makes programming

much faster and easier. With DL-Windows, you can quickly

create Lock Programs, add multiple Users, retrieve event logs,

and create Schedules. The benefit of DL-Windows is that it

allows you to set up all lock programming in advance (on your

computer), and then later transfer the information into the in-

stalled locks at your convenience.

Terminology Used in this Manual (cont'd)

Programming Key

Sequence

Programming

Information

General Program Mode Information

If a wrong key is pressed during code entry, hold any key continuously until the error sound is heard (7 short beeps), this will clear the entry. Re-enter the key

sequence again.

All program sequences are followed by the : key; 2 short beeps indicate a successful program sequence.

Enabling/Disabling Users (By User Number)

3. Disable User

; 3 ; [ _ _ _ ] :

4. Enable User

; 4 ; [ _ _ _ ] :

User Number must be between 2 and 200. (DL2800 Series locks allow up to 200 Users).

NOTE: Will Enable/Disable users even if the user is associated with an enabled group.

Conventions Used in this Manual

Required Programming Level

This is the Programming Level

required to access the Function.

Possible Programming Levels are

"1", "2", "3", "4" and "M", where

"M" = Master Code.

The Programming Level of the

User must be equal to the Func-

tion that is to be accessed.

Function

Description

Function

Number

Function

Name

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Comentarios a estos manuales

Sin comentarios

Alarm Lock Trilogy DL2800 Manual de instrucciones Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Alarm Lock Trilogy DL2800