Alarm Lock Trilogy DL3500 Manual de instrucciones descargar pdf (Pagina 31)

FUNCTION (also called Programming Functions) = are the numbers used to program lock features (enabling/disabling Users, User Groups,

Passage Mode, Schedules, etc.).

GROUP

• USER GROUP = Defining a user to specific groups, allows user entry when the group is allowed entry.

• GROUP 1 DISARMS BURGLAR CONTROL = Manager Group 1 USER CODE entry can disarm an alarm panel during a predefined schedule.

Should the Manager enter outside of the scheduled time, the alarm will not disarm. The alarm panel must be armed through other means (such as

an Alarm Panel Keypad). The Burglary Alarm Panel must be programmed to disarm from an Armed State Only and the zone input must be

programmed for input disarming.

• GROUP 1 ENABLES GROUP 4 USERS = Manager Group 1 USER CODE entry during a predefined schedule will allow access to Group 4

Users.

• GROUP 1 PUTS UNIT IN PASSAGE = Manager Group 1 USER CODE entry during a pre-defined schedule will unlock unit.

INSTALLER = See.... CODE, INSTALLER.

KEYPAD = 10-numeric keys, asterisk and special [AL] key.

• KEYPAD LOCKOUT = Keypad is programmed to lockout users, for a specified period of time, when a specified number of invalid code entries

are performed.

• KEYPAD PROGRAMMING = Ability to program the lock through the keypad.

KEYPRESS = Pressing a button on the Lock’s Keypad.

LEVEL ABILITY = Predefined User Types (such as Master, Installer, Manager, Supervisor, and Print Only User) have specific abilities to program

and/or control the lock.

LOCKOUT ATTEMPTS = A specified number of invalid user code entries (1-9), that will disable the keypad for a predefined period of time (1-60

seconds).

LOCKOUT TIME = A predefined time (1-60) seconds that the lock will stop accepting codes, after a specified number of invalid user code entries

(1-9).

LOG = See... AUDIT TRAIL.

MANAGER = See... CODE, MANAGER.

MASTER = See... CODE, MASTER.

PASSAGE = Allow anyone to pass through the door without USER CODES. (Door is Unlocked)

PRINTER = A printout device (such as: An Infrared Printer or computer printer).

PROGRAM MODE = A mode allowing program/data to be entered through the keypad. Only specific users can program a lock manually, by entering

their USER CODE, followed by the [AL] key. To exit program mode, hold any key until repeated beeps are heard.

PROGRAMMABLE RELAY FUNCTIONS = The relay can be programmed for one or more functions.

RELAY = Switched output allowing remote control of other devices. External power source is required.

• Relay, Ambush Activated - Ambush Code entered prior to a User Code will trip a relay. This will alert Security or trip a zone on an Alarm Panel.

• Relay, Any Keypress - First keypress of any sequence.

• Relay, Authorized Entry - Valid User Code entered.

• Relay, Disabled User Entered Code - Valid User Code entered but the user is disabled.

• Relay, Failed Entry Attempt - Invalid User Code entered.

• Relay, Keypad Lockout - Should several Invalid User Codes be entered that exceed the number of lockout attempts (1-9), then the lock will stop

accepting keypad entries for the Lockout Time (1-60 seconds). The Relay output can be used to indicate tampering of the keypad.

• Relay, Group 1 Activation - A Group 1 Manager can enter a User Code and can disarm a Burglary Alarm Panel using the Relay Output.

1 2 ... 26 27 28 29 30 31 32

Sin comentarios

Alarm Lock Trilogy DL3500 Manual de instrucciones Pagina 31