Alarm Lock ETPLN Guía de usuario descargar pdf (Pagina 15)

DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE 15

CONFIGURING DL-WINDOWS FOR

WIRELESS LOCK USE

Now that the wireless network hardware is installed, you can

use DL-Windows to design your "virtual" system.

The following list are the simplified steps required in DL-

Windows to get a minimum system (one Gateway and one

lock) up and running. These numbered steps correspond with

the detailed procedures that follow:

1. Create a new Account

2. Create a virtual lock "Profile"

3. Discover the Gateway

4. Add ("Assign") the Gateway to an Account

5. Discover physical locks on the Gateway

6. Assign (add) discovered locks to the Gateway

7. Link lock to a Profile

8. Send Profile to lock

It may be helpful to create a "test" Account in DL-Windows

while walking through the procedures below; later you can al-

ways go back and create a separate Account that accurately

reflects a genuine installation.

1. Create a new Account.

Technically, an "Account" is a DL-Windows computer

database file that allows you to organize and maintain

multiple lock installations. But in practical terms, an Ac-

count is often named after the building or company loca-

tion in which a lock or multiple locks have been installed.

For example, the Account Name might be "Overbrook

Hospital" and listed in that Account are the 4 locks you

just installed on the 7th floor. In DL-Windows, Accounts

can be created, edited, cloned and deleted. The benefit

of an Account is that it allows you to add the name of a

User ONCE and then assign that User to multiple locks

within a building, rather than having to enter and re-enter

the same User information again and again for each lock

in the Account. Enter the name of the User once in the

Global Users screen, then sit back and assign that User

to the locks you wish, with just a few clicks of the com-

puter mouse.

Double-click the DL-Windows shortcut, or click Start,

Programs in Windows to find and start the DL-Windows

software. The DL-Windows main screen opens (see

"DL-WINDOWS MAIN SCREEN" image).

(For new installations, a popup appears with directions).

First click OK to clear the popup, then, as directed by the

popup, use your mouse to right-click anywhere in this

white box (the "Account Tree" area at the left), and select

New Account. The New Account dialog opens.

Enter New Account Description

Enter the New Account Description in the field shown

in the "NEW ACCOUNT DIALOG" image. The Account

Description will typically be the name of the company or

facility where a lock(s) will be installed. Note that existing

Accounts from previous installations are also displayed.

Click OK to create this new Account.

(If you wish to delete an Account, right mouse-click the

name of the Account and select Delete Account from

the menu. A warning popup will appear, and click Yes to

confirm, and click No to cancel).

2. Create new virtual "lock Profiles" (also called "Lock

Programs" or "virtual locks"). A lock "Profile" can be

thought of as a "virtual" lock, created within DL-Windows,

that contains all of the instructions that a real lock uses

to perform its various functions. Use DL-Windows to

create a lock Profile on your computer, then transfer

and store the Profile in the lock memory. The lock

Profile is essentially a computer database file that

maintains User Codes, Features, Time Zones and

Schedules.

New Lock Profile

After clicking OK in the New Account dialog, a popup

appears asking if you would like to create a new lock

Profile. Click Yes, and the New Lock Profile dialog ap-

pears (see the "NEW LOCK PROFILE SCREEN" im-

age).

Type the description of the new lock, which will typically

be the name of the room in the facility that the lock is se-

curing. Select the Type of Lock to be programmed from

the drop-down list (for example, the 6100 series). When

finished, click OK. After a few seconds, the new Profile

is created and DL-Windows automatically opens the

Global Users screen. Note: To add a new lock to an

NEW ACCOUNT DIALOG

Configuring DL-Windows for Wireless Lock Use

Right mouse-click here and

select New Account

DL-WINDOWS MAIN SCREEN

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 67 68

Comentarios a estos manuales

Sin comentarios

Alarm Lock ETPLN Guía de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Alarm Lock ETPLN