Alarm Lock ETPLN Guía de usuario descargar pdf (Pagina 24)

24 DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE

the new lock, which will typically be the name of the

room in the facility that the lock is securing. Select

the Lock Type to be programmed from the drop-

down list (for example, the 6100 series), then click

the Number of Locks to Create pull-down menu and

select the number "1". When finished, click OK. Af-

ter a few seconds, the new Profile is created and DL-

Windows automatically opens the Global Users

screen.

2. Discover the new physical lock with the Gateway

Each Networx

™

lock is identified by a unique serial

number assigned and programmed into the lock firm-

ware at the factory. To find installed locks, click the

GW Confg button to open the Gateway Configura-

tion screen.

In the Gateway Configuration screen, click to high-

light and select the Gateway to which you want to as-

sign ("add") the new lock. The Gateway selected will

transmit the discovery request radio signal to the new

lock in the vicinity; if the new lock is within radio

range, the lock will respond.

The maximum search time allowed for each discov-

ery request is 1 minute. To minimize the search time

waiting period, this screen allows you to limit the

search to a certain quantity of installed locks. In addi-

tion, you can manually stop the discovery process at

any time by pressing the Esc key on the keyboard.

Since you know the number of installed locks to be

discovered is "1", in the Number of Locks to Dis-

cover pull-down list, select "1" and the discovery

process will stop the moment "1" lock is found. (If the

number of locks selected exceeds the actual number

within radio range, the discovery process will con-

tinue for either a maximum of 1 minute or until the

Esc key is pressed).

Click the Discover Locks On Selected Gateway

button to initiate the search.

3. Assign (add) discovered locks to the Gateway

A popup screen entitled "Discovered 1 Locks" will

appear, indicating the serial number of the new lock,

its signal strength and lock model. If the serial num-

ber does not appear in this screen, click Close and

try again; if the serial number does not appear after

repeated tries, you may need to stop here and add a

new Gateway to the system (see "Add a new Gate-

way to an existing system" in this section)

In the "Discovered 1 Locks" popup screen, assign

("add") the discovered lock serial number(s) to the

selected Gateway by clicking the check box next to

the lock serial number. Click Use Selected Locks.

4. Link lock to a Profile.

A Link Locks popup appears, asking if you want to

link your new lock now to the Profile created in step

1. Click Yes to open the Link/Unlink Lock Profiles

screen.

The top half of the Link/Unlink Lock Profile(s)

screen contains two fields: "Available Lock Pro-

files" and "Available Lock(s) By Serial Number".

The lock Profile listed in the Available Lock Profiles

field is the same that was created in step 1; click to

select and highlight this lock Profile. In the Available

Lock(s) By Serial Number field, click to select and

highlight the corresponding lock serial number. Click

the Link Lock button to save this link association

within DL-Windows and to add the data to the table

located in the bottom half of the Link/Unlink Lock

Profile(s) screen.

5. Send Profile to lock.

After linking, a Send Profile to Lock Now popup

automatically appears requesting to send the lock

Profile to the physical lock. Click Yes to send the

lock Profile in DL-Windows to the onboard memory

located inside the new physical lock.

The DL-Windows Network Lock Comm Screen

opens.

Check "All" and click the Start Communication but-

ton. The status bar at the bottom of the window will

indicate the communication progress. When commu-

nication is complete, a popup will appear. Click OK

to close the popup, then click Close to close the DL-

Windows Network Lock Comm Screen.

Adding a new Gateway to an existing system.

Make note of the new Gateway's MAC address located

on a square sticker (look under the bar code). It has 12

digits, grouped in 6 pairs separated by dashes.

1. Install the new Gateway.

Use the installation instructions WI1674. Ceiling in-

stallations are typical.

2. Open DL-Windows.

In the main screen, click the Open button and the Ac-

count "white space" opens at the left, listing all Ac-

counts. Double-click the Account name into which

you want to add this new Gateway.

3. Open the Gateway Configuration screen.

Click the GW Confg button to open the Gateway

Configuration screen.

4. Discover the new Gateway.

Click the Discover New Gateways And Auto Add

to Account button. A Discover New Gateways

popup appears; click Yes and DL-Windows searches

the network; when the new Gateway is found, it is

listed in the grid shown in the Gateway Configura-

tion Screen. Verify the MAC address on the screen

matches the MAC address on the sticker inside the

Gateway.

Note that this "Discover New Gateways And Auto

Add to Account" button combines two actions--the

Normal Tasks (cont'd)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Comentarios a estos manuales

Sin comentarios

Alarm Lock ETPLN Guía de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Alarm Lock ETPLN