Alarm Lock ETPLN Guía de usuario descargar pdf (Pagina 51)

DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE 51

The Emergency Lock Down Command locks (secures) all

wireless physical locks within the current Account.

An Emergency Lock Down Command sent to a lock in

any of the following modes…

● Normal mode ("non-Emergency")

● Emergency Passage mode

● Passage mode (via keypad Function 45)

...overrides any of these existing modes and places the

lock in Emergency Lock Down, locking the lock(s).

IMPORTANT: Once in Emergency Lock Down, the wire-

less physical lock(s) may be placed in Passage mode

manually (using keypad Function 48). In addition, when the

lock is in an "Emergency" state, all User Codes are dis-

abled at the keypad except for User Code #1 (the Master

Code) and User Codes 2 through 9 (assuming the "Users

are disabled during Lockdown" check box in the Pro-

grammable Features screen, Options tab is checked).

Emergency View Screen

Click Wireless Commands, Emergency Lock Down and

the DL-Windows main screen flashes a yellow and red

"Lock Down" warning located at the bottom of the screen.

The Emergency View screen appears, displaying all Gate-

ways in the current Account, their descriptions (names and

IP addresses) and real-time status.

Note: The Emergency View screen is a reference screen

only; if closed or minimized, the system will continue to

process the requested Command(s).

As the Gateways process the Lock Down Command, the

Status column indicates "Waiting for verification...". Note

the bottom of the Emergency View screen displays the IP

address of the processing Gateway and the processing du-

ration of the Command, in seconds. All unverifiable re-

quests timeout in 140 seconds.

When all locks in the Gateway are verified as locked, the

Status column cell turns red, indicating "All Locks Se-

cure".

Unable to verify all locks

Note: If some or all locks in the Gateway cannot be con-

firmed as locked via the wireless signal, the Status column

Wireless Commands > Emergency Lock Down

On the DL-Windows main screen, click Wireless Commands, Emergency

Lock Down to lock all wireless locks in the current Account.

IMPORTANT: Threats such as fire emergen-

cies, bomb threats or the release of hazardous

substances within a protected premises may re-

quire an "Emergency Passage" Command to al-

low for a facility evacuation.

Other threats such as terrorist attacks, hostile in-

truder situations, the outdoor release of hazard-

ous substances, tornado emergencies and other

life-threatening events, may require an

"Emergency Lock Down" - the opposite of a facil-

ity evacuation.

It is strongly advised that all facilities develop

separate Emergency Lock Down and Emer-

gency Passage procedures appropriate for the

specific premises, and these Emergency proce-

dures be frequently practiced and continually re-

fined.

turns yellow, reading "Unable to verify all locks". Al-

though these physical locks may indeed be locked, to view

the locks that are unable to be wirelessly verified as locked,

proceed as follows:

1. Click the GW Confg button to open the Gateway

Configuration screen.

2. Click to highlight a specific Gateway in the list.

3. Click Tools, View Gateway's Lock Table. The Lock

Status column clearly indicates which lock(s) are un-

verifiable.

DL-WINDOWS MAIN SCREEN, WIRELESS COMMANDS MENU

LOCK DOWN WARNING

LOCK

DOWN

WARNING

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 67 68

Comentarios a estos manuales

Sin comentarios

Alarm Lock ETPLN Guía de usuario Pagina 51

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Alarm Lock ETPLN