Alarm Lock ETPLN Guía de usuario descargar pdf (Pagina 38)

38 DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE

Tools > Import Assigned Lock From Gateway

To open this screen, click the GW Confg button to open the Gateway Configuration screen. Click to

highlight a specific Gateway in the list, then click:

● Tools, Import Assigned Lock From Gateway

Tools > Import Gateway and Assigned Locks

When the Account information stored in DL-Windows is lost

(such as with a stolen laptop)--AND--the DL-Windows

backup files are either non-existent, inadequate or lost, the

above "Import" options can be used to rebuild an existing

wireless system using the data stored inside the onboard

memory of the installed Gateway device(s).

Although these two options might never be used, their exis-

tence highlights the vital importance of maintaining safe, se-

cure and up-to-date DL-Windows backup files. The short

period of time it takes to back up your files may save

HOURS of tedium trying to re-create and re-build your sys-

tem.

Backup your Accounts

On the DL-Windows main screen, click Tools, Backup Ac-

counts, and the Backup Accounts dialog opens, allowing

you to select where DL-Windows will copy all Account data-

base files; click to select an existing "Backup" folder (or

check the Create New Folder checkbox to generate and

name a new folder). To restore your data, simply copy and

paste the backup files into C:\DL-Windows.

Restoring Data without Backups

If no backups were made for an existing wireless system

and the Account information stored in DL-Windows is lost,

the basic procedure is as follows:

1. Re-install the DL-Windows software.

2. Re-create the Account and all assigned lock Profiles.

In addition, the Global Users screen will need to be re-

populated with all Users.

3. Click the GW Confg button, and a popup appears:

Click OK to close the popup, then on the DL-Windows

main screen, click Tools, Set Security Password, and

the Set Security Password dialog appears:

In the Set Security Password dialog, enter the original

"Security Password" used in the original Account, then

click OK to save.

Important: "Security Passwords" are used to differenti-

ate between separate wireless Accounts. Do NOT share

passwords between Accounts, otherwise the radio sig-

nals of separate Accounts can become intermixed. Be

sure you record--in writing--all Account passwords in a

safe location; once set, passwords are NOT retrievable

from DL-Windows!

4. Click the GW Confg button to open the Gateway Con-

figuration screen.

5. Click Actions, Discover New Gateways. The Gate-

way(s) appear in the Gateway Configuration screen

in green colored text.

6. Click to highlight a specific green-colored Gateway in

the list.

7. Click Tools, Import Gateway and Assigned Locks to

bring in the Gateway settings and all lock serial num-

ber data assigned to that Gateway.

8. In the Gateway Configuration screen, click Tools,

Link / Unlink Lock Profiles.

9. In the Link / Unlink Lock Profiles screen, the lock se-

rial numbers will be listed in the Available Lock(s) By

Serial Number field, available to be re-linked. After

linking, a Send Profile to Lock Now popup automatically

appears requesting if you wish to send the lock Profiles to

the physical lock(s).

SET SECURITY PASSWORD DIALOG

BACKUP ACCOUNTS SCREEN

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 67 68

Comentarios a estos manuales

Sin comentarios

Alarm Lock ETPLN Guía de usuario Pagina 38

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Alarm Lock ETPLN